Handling information according to ISO 7000

DIN pictorials on transport packing in the form of handling instructions give forwarders and freight companies in particular clear instructions on the handling of packages and are therefore essential on any logistics container.

ProCase packing systems are available with the usual handling instructions printed on them. Handling information is to the standards as follows: ISO 7000 and EN ISO 780, which are internationally recognised.


Pictorial "top"


Symbol ISO 7000 No. 0623

Indicates the upright position of the package.
Template 80mm, Item No. 091981

Template 115mm, Item No. 091982

Pictorial "keep dry"

Keep dry

Symbol ISO 7000 No. 0626

The package must be kept in a dry environment
Template 80mm, Item No. 091983

Template 115mm, Item No. 091984

Pictorial "fragile"


Symbol ISO 7000 No. 0621

The contents of the package are fragile and must therefore be handled with care. Do not drop or sling. Stacking allowed.
Template 80mm, Item No. 091985

Template 115mm, Item No. 091986

Pictorial "slinging allowed"

Slinging allowed

Symbol ISO 7000 No. 0625

Slinging equipment must be applied as shown in order to lift the package.
Template 80mm, Item No. 091987

Template 115mm, Item No. 091988

Pictorial "centre of gravity"

Centre of gravity

Symbol ISO 7000 No. 0627

Indicates the centre of gravity of a package that is to be handled as a single unit.
It is recommended that this symbol is affixed on 2 sides plus the top side if the centre of gravity does not lie centrally.
Template 80mm, Item No. 091989

Template 115mm, Item No. 091990

Pictorial "do not stack"

Do not stack

Symbol ISO 7000 No. 2402

Stacking of the packages is not permitted and no loads should be placed on the package.
Template 80mm, Item No. 091997

Pictorial "permitted temperature range"

Permitted temperature range.

Symbol ISO 7000 No. 0632

Indicates the temperature range within which the package must be stored and handled.
Possible minimum and maximum values:

  • -10°C - + 40°C
    115mm: item No. 092104T1
  • -20°C - + 60°C
    115mm: item No. 092104T2
Pictorial "do not use fork lift truck here"

Do not use fork lift truck here

Symbol ISO 7000 No. 2406

Use of fork lift is only permitted at those points indicated. (there is also the opposite symbol available)

Pictorial "use fork lift truck at this point"

Use fork lift truck at this point

Symbol ISO 7000

Sticker 115 mm: Item No. 0925011

Pictorial "permitted humidity area"

Permitted humidity area

Symbol ISO 7000 No. 2620

Value given = relative humidity (RH)

  • 10%RH - 90%RH
    115mm: Item No. 092107L2
  • 30%RH - 75%RH
    115mm: Item No. 092107L1
Pictorial "permitted pressure area"

Permitted pressure area

Symbol ISO 7000 No. 2621

Value given:

  • 500 hPa - 1060 hPa
Pictorial "container sufficient for 1 piece"

Container sufficient for 1 piece

Symbol DIN EN, No. 5.14

Gives information as to how many pieces of equipment or parts the container may hold.